Electrical, rheological and morphological studies in co-continuous blends of polyamide 6 and acrylonitrile–butadiene–styrene with multiwall carbon nanotubes prepared by melt blending

Multiwall carbon nanotubes (MWNT) were incorporated in melt-mixed co-continuous blends of polyamide 6 (PA6) and acrylonitrile–butadiene–styrene (ABS) using a conical twin-screw microcompounder. The state of dispersion of MWNT in the blends was assessed through AC electrical conductivity measurements and melt-rheological investigations. The electrical and rheological percolation threshold in PA6/ABS blends was ∼3–4 and ∼1–2 wt% MWNT, respectively. A unique reactive modifier (sodium salt of 6-amino hexanoic acid, Na–AHA) was employed to facilitate ‘network-like’ structure of MWNT and to confine them in a specific phase. This was achieved by establishing specific interactions with the delocalized ‘π-electron’ clouds of MWNT and melt-interfacial reaction during melt-mixing. The electrical percolation threshold was significantly reduced in the blends (∼0.25 wt%) in the presence of Na–AHA modified MWNT and even coincided with the rheological percolation threshold. Significant refinement in the co-continuous structure was also observed in the presence of Na–AHA modified MWNT.