کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
822214 | 1469560 | 2008 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Characterization and microstructural evolution of SiC(OAl) fibers to SiC(Al) fibers derived from aluminum-containing polycarbosilane Characterization and microstructural evolution of SiC(OAl) fibers to SiC(Al) fibers derived from aluminum-containing polycarbosilane](/preview/png/822214.png)
The SiC(OAl) fibers and the SiC(Al) fibers were fabricated by the use of aluminum-containing polycarbosilane (Al–PCS) precursor. The two types of fibers have been characterized. Chemical element analysis, AES, SEM, XRD, RMS and NMR have been employed. The chemical formula of SiC(OAl) fibers is SiC1.31O0.25Al0.018 with C and O rich on the surface. The microstructure of SiC(OAl) fibers is a mixture of β-SiC nanocrystals, free carbon, and an amorphous silicon oxycarbide (Si–C–O phase), which have been confirmed by an amount of SiC2O2, SiCO3, SiO4 and SiC3O units in the 29Si MAS NMR spectrum. A small quantity of aluminum is embedded uniformly in the Si–C–O amorphous continuous phase. For SiC(Al) fibers, nearly stoichiometric composition was confirmed as chemical composition of SiC1.03O0.013Al0.024. The fiber is composed of a large number of β-SiC crystallites, a small amount of α-SiC crystalline and SiC amorphous phase. The aluminum in the SiC(Al) fibers mainly exists in two manners: Al–C bonds connected with the surfaces of the β-SiC grains and Al–O bonds, or Al2O3, to the amorphous phase.
Journal: Composites Science and Technology - Volume 68, Issues 7–8, June 2008, Pages 1697–1703