کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
822226 | 1469560 | 2008 | 6 صفحه PDF | دانلود رایگان |
In order to determine the dielectric constants of 3D orthogonal woven single fiber type (SFT) and hybrid composites from their component dielectric properties, a theoretical model is proposed based on the rule of binary mixtures. The model shows that with the same fiber volume fraction, a component with a larger cross-sectional area perpendicular to the electric field has a greater contribution to the composite dielectric constant. For experimental verification, SFT basalt/epoxy and aramid (Kevlar 129)/epoxy as well as interply and intraply basalt/aramid/epoxy 3D orthogonal woven hybrid composites were fabricated and their dielectric properties were measured using the waveguide method at a frequency range of 8–12 GHz. At 10 GHz, the experimental results agreed well with the calculated results from the model for the SFT composites, while a positive hybrid effect on the dielectric constant was observed for the two hybrid composites.
Journal: Composites Science and Technology - Volume 68, Issues 7–8, June 2008, Pages 1794–1799