Isolation of nanofibers from soybean source and their reinforcing capability on synthetic polymers

The focus of this work is to study nanofibers in three different polymers: polyvinyl alcohol (PVA), polypropylene (PP) and polyethylene (PE). The nanofibers were isolated from a soybean source by combining chemical and mechanical treatments. Isolated nanofibers were shown to have diameter between 50 and 100 nm and the length in micrometer scale which results in very high aspect ratio. The mechanical properties demonstrated an increase in tensile strength from 21 MPa of PVA/UNF5 (untreated-fiber (5 wt%) reinforced PVA) and 65 MPa of pure PVA to 103 MPa of PVA/SBN5 (nanofiber (5 wt%) reinforced PVA). The increased stiffness of PVA/SBN5 nanocomposites was also very promising; it was 6.2 GPa compared to 2.3 GPa of pure PVA and 1.5 GPa of PVA/UNF5. In solid phase melt-mixing, nanofiber was directly incorporated into the polymer matrix using a Brabender. The nanofiber addition significantly changed the stress–strain behavior of the composites: modulus and stress were increased with coated nanofibers by ethylene–acrylic oligomer emulsion as a dispersant; however, elongation was reduced. The dynamic mechanical analysis showed the addition of the soybean nanofiber (SBN) improved the thermal properties for PVA and how the addition of different contents of SBN influenced the tan δ peak and storage modulus of PVA.