Effect of aging on the abrasive wear properties of AlMgSi1 alloy

In this paper, the wear performance of the aged AlMgSi1 alloy was investigated. Great improvements in mechanical properties of Al alloys can be achieved by suitable solution treatment and aging operations. A pin-on-disk wear machine was designed and developed for abrasive wear tests. The wear resistance was evaluated using a pin-on-disk wear testing method with a SiC abrasive paper counterface. The variation of wear volume is presented as a function of applied normal load, abrasive grit size and sliding distance for running speed. Mass losses were measured within a load range of 6.45–11 N, a sliding velocity range of 0.078–0.338 m/s and abrasive grit size of 5–30 μm. The effects of different sliding speeds and loads on wear resistance and surface roughness were also examined. It was measured amounts of mass loss and examined worn surfaces. Metal microscope was used to study the microstructures of the wear scars. Natural aged specimen observed maximum wear resistance.