کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
846370 | 909187 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A novel three-dimensional shape measurement method based on a look-up table
ترجمه فارسی عنوان
یک روش جدید اندازه گیری شکل سه بعدی بر اساس یک جدول جستجو
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
اندازه گیری مشخصات سه بعدی، پروفیل بینی پیش بینی جدول جست و جو
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
Fringe projection profilometry is widely used for three-dimensional shape measurement. In an oblique-angle projection, the fringe cycle is broadened on the reference plane. Phase errors are mainly caused by the nonlinear gamma of the projector and fringe cycle broadening. This study describes a phase error compensation method to eliminate these phase errors. A look-up table that stores phase errors is constructed for phase error compensation. Based on it, a new height equation is proposed. The experimental results show that the proposed method can compensate for the phase errors of the fringe projection profilometry, thereby improving the measurement accuracy significantly.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optik - International Journal for Light and Electron Optics - Volume 125, Issue 6, March 2014, Pages 1804–1808
Journal: Optik - International Journal for Light and Electron Optics - Volume 125, Issue 6, March 2014, Pages 1804–1808
نویسندگان
Yanjun Fu, Zhigang Wang, Guangyu Jiang, Jie Yang,