کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
850057 | 909279 | 2013 | 5 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Signal processing of double-beam and double-scattering laser Doppler velocimeter Signal processing of double-beam and double-scattering laser Doppler velocimeter](/preview/png/850057.png)
The common method of laser Doppler velocimeter (LDV) signal processing is fast Fourier transform (FFT). Because of the restraint of spectral interference, fence effect and spectrum leakage, the precision of FFT is not high. In order to improve the accuracy of double-beam and double-scattering laser Doppler velocimeter signal processing, an algorithm based on spectral refinement and interpolation is put forward. First, high-pass filter is adopted to remove the baseplate of LDV signal. Second, FFT is adopted to get the estimate of Doppler frequency and then Zoom-FFT is used to refine the local range of Doppler frequency. Third, four-term fifth derivative Nuttall windowed interpolation is used to correct the refined spectrum. Then the accurate estimate of Doppler frequency can be obtained. Simulations and experiments based on the LDV system built in laboratory show that Zoom-FFT can improve the resolution of spectrum and four-term fifth derivative Nuttall windowed interpolation can further increase the precision of signal processing.
Journal: Optik - International Journal for Light and Electron Optics - Volume 124, Issue 19, October 2013, Pages 3819–3823