Temperature independent length optimization of L-band EDFAs providing flat gain

In this study, single stage (SS), double-stage (DS), and gain flattened (GF) DS L-band erbium-doped fiber amplifier (EDFA) configurations are designed in order to obtain a flat gain amplifier. Temperature dependence of the mentioned configurations is also analyzed. Maximum spectral dependence of EDFA gain with respect to temperature is obtained for SS EDFA design while smaller spectral dependence of gains is obtained for both DS and GF DS L-EDFA configurations. It is observed that the maximum temperature dependence is in the range of 1570–1580 nm band for all configurations. It has also been found that for all configurations, reducing the temperature has greater effect than raising the temperature on EDFA gain. The overall results show that a temperature independent L-band configuration has not been possible. However, for some signal wavelengths, the erbium-doped fiber (EDF) lengths at which the gain is temperature independent are observed.