Dual-beam coaxial amplification system of stimulated Brillouin scattering based on polarization control technology

In the field of Brillouin lidar, it has very important significance to find one method that can amplify the Brillouin scattering signal in real time. One new-type Brillouin lidar detection system based on Nd:YAG pulsed laser and polarization control device is designed in this paper. The key point of this detection system is to have two pulsed coherent lights with same frequency, same polarization and same initial phase, of which one beam is taken as the detection wave for generating stimulated Brillouin scattering signal and the other beam is taken as pumping wave for real time and effective amplification of stimulated Brillouin scattering signal. This detection system mainly includes two pulsed lasers and one electro-optical polarization controller. The laser is mainly used to obtain the pulsed lights with same frequency and same phase, and the polarization controller is mainly used to change the polarization state of two coaxial beams to make them change into same polarization state from orthogonal polarization state thus to enable the pumping wave to amplify the backward stimulated Brillouin scattering signal. It is shown from the experimental results that the adoption of this new system can realize the effect of pumping amplification and can increase the signal to noise ratio to a certain extent.