کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
859294 | 1470757 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Experimental Study on the High Speed Machining of Hardened Steel
ترجمه فارسی عنوان
مطالعه تجربی بر روی ماشینکاری با سرعت بالا از فولاد سخت
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
In the present paper, experimental study is made to investigate the effect of cutting parameters on surface roughness in dry high speed milling of hardened tool steel using two cutting tools (diameter of 20 and 40 mm). The cutting parameters considered include cutting speed and feed per tooth. Experiments are conducted in up-cut and down-cut milling. Based on the experimental data, the effect of tool diameter on the surface roughness is analyzed. The good surface roughness can be achieved in high speed machining of examined steel but rapidly tool wear is observed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia Engineering - Volume 69, 2014, Pages 291-295
Journal: Procedia Engineering - Volume 69, 2014, Pages 291-295