Predicting recovery from exertional heat strain in military working dogs

A two-compartment (core, skin) rational Canine Thermal Model (CTM) of thermal-physiological responses was developed to predict the core temperature (Tc) of a military working dog (MWD) during recovery from exertional heat stress. Heat storage is represented as the balance among heat loss mechanisms, heat gain from the environment, and heat production from metabolism. Inputs to the CTM include environmental conditions (ambient temperature, relative humidity, solar radiation and wind speed), physical characteristics of the dog (weight, length), and metabolic rate. The CTM was validated against Tc of 16 MWDs measured in a previous study, where training was conducted in October (24 °C, 52% RH), March (14 °C, 74% RH), and August (28 °C, 64% RH). Measured and CTM-simulated Tc were compared at 5, 10, 15, 30 and 60 min post-exercise. The CTM was considered acceptable if it was within 0.5 °C of measured Tc for 80% of cases. This occurred in 92% of 37 cases after 30 min recovery, and 86% of 29 cases after 60 min. The mean difference between CTM-simulated and measured Tc was − 0.01 °C at 30 min recovery, with 2 of 37 cases falling outside the range of two standard deviations (Bland Altman comparison). After 60 min recovery the difference was 0.05 °C, with 4 of 29 cases outside the range of acceptance. The root mean squared deviation between CTM-simulated and measured Tc for all time points was 0.3 °C ± 0.3 °C. For comparison, the mean ± standard deviation of resting Tc was 38.2 °C ± 0.3 °C and at peak Tc was 39.4 °C ± 0.7 °C. For this population, the CTM is a valid method for simulating recovery from exertional heat stress. It can be used to develop work / rest cycles during activity in hot environments, and to compare rates of recovery across different environmental conditions.