کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
865636 909677 2008 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
Thermomechanical Behavior in Continuous Bloom Casting with Different Mold Tapers
چکیده انگلیسی
A two-dimensional finite element model was used to analyze the thermal and mechanical behavior during solidification of the strand in a continuous bloom casting mold. The coupled heat transfer and deformation were analyzed to simulate the formation of the air gap between the mold and the strand. The model was used to investigate the influence of mold taper on the temperature and stress distributions in the strand. The results show that the air gap mainly forms around the strand corner, causing a hotter and thinner solidifying shell in this region. The mold taper partially compensates for the strand shell shrinkage and reduces the influence of the air gap on the heat transfer. The mold taper compresses the shell and changes the stress state around the strand corner region. As the strand moves down into the mold, the mold constraint causes compressive stress beneath the corner surface, which reduces the hot tear that forms on the strand.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tsinghua Science & Technology - Volume 13, Issue 5, October 2008, Pages 598-604
نویسندگان
, , ,