Flash pyrolysis of polymer-derived SiOC ceramics

For the first time, flash pyrolysis was carried out to fabricate polymer derived silicon oxycarbide (SiOC) ceramics. With the application of a DC electric field at a furnace temperature of only 780 °C, the SiOC ceramics exhibit characteristics that usually have to be pyrolyzed at ∼1300 °C. Both electric field and current density accelerate the SiOC microstructure development, causing carbon and SiC phases to form at >520 °C lower pyrolysis temperatures than conventional within the SiOC matrix. With higher electric fields, the samples experience greater mass loss and linear shrinkage, while also forming more SiC and a more ordered carbon phase. The SiC formation inversely impacts the carbon content, causing a decrease in electrical conductivity. Further, reducing current density results in significant carbon precipitation without SiC formation. The fundamentals can be explained based on increased nucleation rate by the electrical field, accompanied by Joule heating and electromigration. This work is the first to demonstrate the great potential of flash pyrolysis on accelerated phase separation of polymer derived SiOC.