The effects of anodic and cathodic processes on the characteristics of ceramic coatings formed on titanium alloy through the MAO coating technology

This paper reports on the investigation into the effects of the different anodic ja and cathodic jc current densities on the variations of the anodic and cathodic processes and the associated changes in the characteristics of the coatings synthesized on Ti-6Al-4V alloy substrate by microarc oxidation technique. The coated samples were subjected to coating thickness and cross-section fracture observation. Phase and elemental composition at different depth of the coatings were evaluated through X-ray diffraction and energy dispersive spectrum analyses. The experimental results indicate that the increase of ja leads to the increasing slope of anodic voltage U+ versus oxidation time plots, the larger coating thickness and the more coarse surface morphology of MAO coatings; while the aggrandizement of the cathodic process results in the lower growth rate and more uniform structure of coatings. The changes of the elements distribution from the interface towards the coating surface with variation of ja and jc are affected by the Ti anodic dissolution and the electromigration of electriferous particles, such as Al(OH)4−, in electrolytes.