Solar light decomposition of DFP on the surface of anatase and rutile TiO2 prepared by hydrothermal treatment of microemulsions

The photocatalytic decomposition of diisopropylfluorophosphate (DFP) over nanostructured anatase and rutile TiO2 powder was investigated by FTIR and XPS. Upon irradiation with artificial solar light DFP decomposed on both polymorphs as evidenced by FTIR. For both crystalline structures acetone and subsequently coordinated formate and carbonate were observed on the surface during the photocatalytic reaction as the isopropyl groups dissociated from DFP. XPS revealed that small amounts of phosphates and inorganic fluoride (TiF) gradually built up on both TiO2 surfaces, while organic F was present only on the rutile phase. From repeated cycles of intermittent DFP adsorption and irradiation measurements, the decomposition rates and formation of residuals on the surface were deduced. It was found that the overall oxidation yield is higher on anatase than rutile. The oxidation rate decreases with increasing irradiation time, an effect that is more pronounced on rutile. We find that both the difference between the polymorphs and the initial decrease of the oxidation yield can largely be explained by variations in surface area rather than poisoning by POx or F species. In particular, we observe a dramatic decrease of the specific area of rutile as a function of photocatalytic oxidation cycle.