کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9636438 | 465853 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Towards an ultimate fluidized bed stripper
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Experiments were conducted in the geometrically- and dynamically-scaled UBC half-column to test different configurations that might significantly reduce stripper shed fouling and increase run length, while providing little or no decrease in stripping efficiency in two commercial fluid cokers. The results showed that a series of horizontal gas jets, without baffles, constrained to use no more steam than in the existing commercial operations, were unable to fully match the stripping efficiency of the strippers with shed internals. Wall baffles were also of little assistance. However, relatively large crossed-sheds, called “mega-sheds,” combined with a limited number of staggered gas jets, provide a promising geometry, with more tolerance to fouling and stripping efficiency equivalent to that of the existing commercial units.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Powder Technology - Volume 158, Issues 1â3, 27 October 2005, Pages 124-132
Journal: Powder Technology - Volume 158, Issues 1â3, 27 October 2005, Pages 124-132
نویسندگان
Ian Rose, Heping Cui, Tianzhu Zhang, Craig McKnight, John Grace, Xiaotao Bi, Jim Lim,