کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9702449 | 1462564 | 2005 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Study on the Machining Distortion of Thin-walled Part Caused by Redistribution of Residual Stress
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی هوافضا
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In order to reduce the weight of airplane and increase its mechanical behaviors, more and more large integrated parts are applied in modern aviation industry. When machining thin-walled aeroplane parts, more than 90% of the materials would be removed, resulting in severe distortion of the parts due to the weakened rigidity and the release of residual stress. This might also lead to stress concentration and damage of the parts. The effect of material removal from residually stressed billet is simulated using FEA software M SC. Marc and the causations of distortion is analyzed. To verify the finite element simulation, a high speed milling test on aluminum alloy 7050T7351 is carried out. The results show that the simulation result is consistent with the experimental one. It is concluded that the release of residual stress is the main cause of machining distortion.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Chinese Journal of Aeronautics - Volume 18, Issue 2, May 2005, Pages 175-179
Journal: Chinese Journal of Aeronautics - Volume 18, Issue 2, May 2005, Pages 175-179
نویسندگان
Zhao-jun WANG, Wu-yi CHEN, Yi-du ZHANG, Zhi-tong CHEN, Qiang LIU,