کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9705349 | 1464615 | 2005 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A new approach to cutting state monitoring in end-mill machining
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: A new approach to cutting state monitoring in end-mill machining A new approach to cutting state monitoring in end-mill machining](/preview/png/9705349.png)
چکیده انگلیسی
A new cutting state monitoring approach is proposed for the real-time predicting of the machining trouble and the surface quality of the machined products. In this approach, the relationships among the mechanical model of cutting process and its corresponding time series model, the surface roughness of the machined workpiece are evaluated through theoretical analysis and experimental investigation. It is therefore revealed that there is the linear relationships among the AR parameter a1, the stiffness k3 of cutting model and surface roughness Pz, and consequently the cutting process state can be estimated by only monitoring time series parameter a1 of vibration signal measured during machining operation. In particular, it was found that the variation in the surface roughness of Pz=3-5 μm can be fully monitored.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Machine Tools and Manufacture - Volume 45, Issues 7â8, June 2005, Pages 909-921
Journal: International Journal of Machine Tools and Manufacture - Volume 45, Issues 7â8, June 2005, Pages 909-921
نویسندگان
Dong-Yeul Song, Nobuo Otani, Takayuki Aoki, Yuichiro Kamakoshi, Yasuhiro Ohara, Haruo Tamaki,