کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9795474 | 1514930 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microsegregation during the solidification of an Al-Mg-Si alloy in the presence of back diffusion and macrosegregation
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A model for one-dimensional, transient multicomponent microsegregation in ternary alloys subject to changes in overall composition and back diffusion in the primary phase during solidification is presented. A commercially available thermodynamic package (JMATPRO) is used to determine ternary phase diagrams and alloy properties. The models are suitable to be subprograms in macroscale transport models for alloy solidification processes (such as direct chill and strip casting), and calculations were performed for a commercially interesting aluminum alloy (Al-1Â wt.% Mg-1.15Â wt.% Si). During cooling at a constant rate, the composition was varied positively or negatively to induce dissolution or accelerated freezing of the solid. Composition profiles in the primary Al phase, temperature histories, and liquidus paths were calculated. As expected, the limited diffusion in this model increased the amount of primary solid formed. In multicomponent systems, the back diffusion has this effect not only because of the accelerated freezing rate, but also because it alters the path down the liquidus surface.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volumes 413â414, 15 December 2005, Pages 217-222
Journal: Materials Science and Engineering: A - Volumes 413â414, 15 December 2005, Pages 217-222
نویسندگان
Igor VuÅ¡anoviÄ, Božidar Å arler, Matthew J.M. Krane,