کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9796038 | 1514940 | 2005 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
A dislocation-model of forming limit diagrams of FCC metal sheet with combination of cube and copper orientations
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this study, the right-hand portion of the forming limit diagram (FLD) of a strain rate-sensitive FCC metal sheet with different combinations of two texture components, (001)[01¯0](cube component) and (112)[111¯](copper component) orientations and dislocation hardening effect at meso level, was predicted. Unlike the Marciniak-Kuczynski (M-K) model, no surface grooves in the sheet were assumed in the calculation. Because of the non-uniformity of microstructure in the thermal-mechanically processed sheet, narrow bands of grains with a similar orientation are assumed to exist instead. These bands behaved like a single crystal and deformed differently from their neighboring grains. The result from the simulation at the meso level was compared with two experimentally measured FLDs of a direct chill (O-temper) and continuous cast (H-temper) Al sheets.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 402, Issues 1â2, 15 August 2005, Pages 149-157
Journal: Materials Science and Engineering: A - Volume 402, Issues 1â2, 15 August 2005, Pages 149-157
نویسندگان
X.Y. Wen, T. Zhai, C.H. Xiao, S. Ningileri, Z. Li, W.B. Lee, S. Das,