کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9796041 | 1514940 | 2005 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Extrusion behavior of Al-Cu alloys in the semisolid state
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Extrusion behavior of Al-Cu alloys in the semisolid state Extrusion behavior of Al-Cu alloys in the semisolid state](/preview/png/9796041.png)
چکیده انگلیسی
Melt-extrusion is a new fabrication process with the characteristics of both casting and extrusion. In this process, a metallic melt which is poured and solidified up to semisolid state in the container can be directly extruded through the die exit to form a product of bar shape without other intermediate processes. In this study, the fabrication characteristics of the process were evaluated with various process parameters, such as extrusion temperature, initial ram velocity and initial microstructure. Al-Cu alloys were successfully extruded after squeezing out of liquid during melt-extrusion with smaller force compared to the solid extrusion. The extrusion temperature and initial ram velocity increase with increasing volume of squeezed liquid. The extrusion pressure tended toward decrease with increasing extrusion temperature and decreasing initial ram velocity. The amount of squeezed liquid was reduced by treatment of grain refiner into Al-Cu melt.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 402, Issues 1â2, 15 August 2005, Pages 170-176
Journal: Materials Science and Engineering: A - Volume 402, Issues 1â2, 15 August 2005, Pages 170-176
نویسندگان
B.S. Lee, D.H. Joo, M.H. Kim,