کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
9796386 | 1514946 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaluation of bendability of sheet metals using void coalescence models
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Bendability of sheet metals often refers to the ratio of the minimum bend radius to the sheet thickness at which the bending process is accomplished successfully. Failure here denotes the occurrence of shear bands, localized necking, cracks or ultimately fracture. The conditions to prevent these types of failures are directly related to the exhaustion of tensile ductility of the outer material fiber at the convex side of the bent sheet. In the present work the bendability of sheet metals are predicted by considering two types of possible failure conditions; namely shear band formation or micro-necking within the material ligaments between neighboring voids. Such analysis is based on assuming a material with an initial void fraction together with a formulation for the laws governing void growth in volume and evolution in shape for porous solids. The results obtained display the effects of hardening as well as anisotropy. The predicted bendability plotted versus ductility is compared favorably with experimental evidence from the literature for various sheet metals.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 395, Issues 1â2, 25 March 2005, Pages 102-109
Journal: Materials Science and Engineering: A - Volume 395, Issues 1â2, 25 March 2005, Pages 102-109
نویسندگان
A.R. Ragab, Ch. A. Saleh,