کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10145812 | 1646368 | 2018 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microwave pre-curing of Portland cement-steel slag powder composite for its hydration properties
ترجمه فارسی عنوان
مایکروویو قبل از آماده سازی پودر کامپوزیت پودر سیمان سرباره فولاد برای خواص هیدراتاسیون آن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مایکروویو قبل از خمیراندن، سیمان پورتلند، پودر سرباره فولاد، خواص هیدراتاسیون،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
A comparative study was carried out between normal curing, 40â¯Â°C steam curing for 10â¯h, 80â¯Â°C steam curing for 4â¯h and microwave pre-curing for 45â¯min to investigate the effect of microwave pre-curing on the hydration of Portland cement-steel slag powder composite. The compressive strength of mortar prepared with composite binder was tested. The hydration and microstructure of the composite were also studied by XRD, TG-DSC, MIP, Water absorption and SEM-EDS methods. The results show that although the hydration degree of composite binder microwave treated is lower than that cured with steam, the porosity, especially the pores larger than 50â¯nm, is reduced significantly by microwave pre-curing. Therefore, a small amount of hydrated products can connect each phase into a whole to improve the compressive strength of mortar treated with microwave when compared with other three regimes. In addition, as for the inert RO or Fe2O3 in the steel slag, it does not have an adverse effect on the microstructure as it can be tightly connected with the hydrated gel. But microwave pre-curing cannot accelerate the hydration of C2F, which is different from 80â¯Â°C steam curing.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 189, 20 November 2018, Pages 1093-1104
Journal: Construction and Building Materials - Volume 189, 20 November 2018, Pages 1093-1104
نویسندگان
Yaning Kong, Peiming Wang, Shuhua Liu,