کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10285371 | 503703 | 2005 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Strength development in autoclaved blends made with OPC and clay-brick waste
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This article reports findings on the strength development of autoclaved OPC-clay-brick blends, where a variety of clay-brick types were used. The strength variations are explained in terms of differences in chemical and mineralogical properties of clay-brick as well as the phases formed during autoclaving. An overall increase in strength was characteristic for 30-60 mass% for all clay-brick type additions. The optimum compressive strengths were achieved at 50 mass% clay-brick additions, where highly crystalline 1.1 nm tobermorite coexisted with “fibrous C-S-H”.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Construction and Building Materials - Volume 19, Issue 5, June 2005, Pages 353-358
Journal: Construction and Building Materials - Volume 19, Issue 5, June 2005, Pages 353-358
نویسندگان
M. Gutovic, D.S. Klimesch, A. Ray,