Study on cottonseed oil as a partial substitute for diesel oil in fuel for single-cylinder diesel engine

The experiments were undertaken to obtain the knowledge necessary for raising the thermal efficiency of mixed oil composed of cottonseed oil and conventional diesel oil and for improving the performance of engine fuelled by the mixture. The experimental results obtained showed that a mixing ratio of 30% cottonseed oil and 70% diesel oil was practically optimal in ensuring relatively high thermal efficiency of engine, as well as homogeneity and stability of the oil mixture. A quadratic regressive orthogonal design test method was adopted in the experiment designed to examine the relationship between specific fuel consumption and four adjustable working parameters (intake-valve-closing angle (α), exhaust-valve-opening angle (β), fuel-delivery angle (θ) and injection pressure (P, in 104 Pa)) when the above-mentioned oil mixture was used. The mathematical equations characterizing the relationship were formulated. The equation of specific fuel consumption derived from the regressive test under each operating condition was set as the objective function and the ranges for the four adjustable working parameters were the given constraint condition. Models of non-linear programming were then constructed. Computer-aided optimization of the working parameters for 30:70 cottonseed oil/diesel oil mixed fuel was achieved. It was concluded that the predominant factor affecting the specific fuel consumption was fuel-delivery angle θ, the approximate optimal value of which, in this specific case, was 3-5° in advance of that for engine fuelled by pure diesel oil. The experimental results also provided useful reference material for selection of the most preferable combination of working parameters.