کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10364235 871565 2005 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Fabrication and characterisation of high quality ZnO thin films by reactive electron beam evaporation technique
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر سخت افزارها و معماری
پیش نمایش صفحه اول مقاله
Fabrication and characterisation of high quality ZnO thin films by reactive electron beam evaporation technique
چکیده انگلیسی
High quality zinc oxide thin films have been deposited on silicon substrates by reactive e-beam evaporation in an oxygen environment. The effect of the growth temperature and air annealing on the structural, optical and electrical properties has been investigated. X-ray diffraction measurements have shown that ZnO films are highly c-axis-oriented and that the linewidth of the (002) peak is sensitive to the variation of substrate temperature. The optimum growth temperature has been observed at 300 °C. Raman spectroscopy has been found to be an efficient tool to evaluate the residual stress in the as-grown ZnO films from the position of the E2 (high) mode. On the other hand, the vanishing of the 574 cm−1. Raman feature after annealing has been explained as due to an increase of grain size and the reduction of O-vacancy and Zn interstitial. The SEM images have shown that the surfaces of the electron beam evaporated ZnO became smoother for the growth temperatures higher than 300 °C. The optical transmittance is the highest at 300 °C and has been increased after annealing in air showing an improvement of the optical quality. Finally, the maximum electrical resistivity has been found at 300 °C, which explains its relation with the crystal quality and increased from 5.8×10−2 Ω cm to reach an approximate value of 109 Ω cm after annealing at 750 °C.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Microelectronics Journal - Volume 36, Issue 8, August 2005, Pages 694-699
نویسندگان
, , , , , ,