Late horizon silver, copper, and tin from Machu Picchu, Peru

Analyses of silver–copper alloy artifacts from Machu Picchu show silver contents ranging from 24 to 81%. The tin present, ranging up to 3%, originated with the copper, perhaps from admixture of recycled bronze. The presence of 0.4–0.9% lead in the silver-rich phase indicates use of silver prepared by cupellation. All the objects had been forged after casting, some extensively. All have surface enhancement of the silver arising from depletion of the copper-rich phase. Some of the tin found at the site contains inclusions of hardhead (FeSn2) and of a nickel–arsenic–copper compound. Forming trials with duplicate silver–copper alloys show that intermediate anneals at temperatures between 500 and 600 °C facilitate making thin sheet artifacts. Mechanical tests show that the most commonly used alloys, containing 25–30% silver, are particularly well adapted to forging because of their uniform work hardening during plastic deformation. Annealing of the laboratory-made alloys in air followed by boiling in salty weak acid creates a silver-rich surface layer comparable to that found in the artifacts. Depletion forms a dense silver surface on the alloy containing more silver than the eutectic composition, but a porous surface layer on the 25% silver alloys.