کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10384638 | 881558 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
In lubro 3D measurement of oil film thickness at the interface between tool and workpiece in sheet drawing using a fluorescence microscope
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: In lubro 3D measurement of oil film thickness at the interface between tool and workpiece in sheet drawing using a fluorescence microscope In lubro 3D measurement of oil film thickness at the interface between tool and workpiece in sheet drawing using a fluorescence microscope](/preview/png/10384638.png)
چکیده انگلیسی
In order to understand quantitatively the micro-contact and lubricant behavior at the interface between a tool and a workpiece in sheet drawing, a method for mapping the oil film thickness in lubro has been developed. This is based on the use of a fluorescence microscope. It is shown, firstly, that the in situ oil film thickness between the tool and the workpiece can be measured three dimensionally, and, secondly, that the in situ surface topography of the workpiece can be visualized clearly. From the 3D surface topography, the permeation of the trapped lubricant into the real contact area can be observed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Tribology International - Volume 38, Issue 2, February 2005, Pages 105-112
Journal: Tribology International - Volume 38, Issue 2, February 2005, Pages 105-112
نویسندگان
Akira Azushima,