Mechanistic insight into sonochemical biodiesel synthesis using heterogeneous base catalyst

The beneficial effect of ultrasound on transesterification reaction is well known. Heterogeneous (or solid) catalysts for biodiesel synthesis have merit that they do not contaminate the byproduct of glycerol. In this paper, we have attempted to identify the mechanistic features of ultrasound-enhanced biodiesel synthesis with the base-catalyst of CaO. A statistical design of experiments (Box-Behnken) was used to identify the influence of temperature, alcohol to oil molar ratio and catalyst loading on transesterification yield. The optimum values of these parameters for the highest yield were identified through Response Surface Method (with a quadratic model) and ANOVA. These values are: temperature = 62 °C, molar ratio = 10:1 and catalyst loading = 6 wt.%. The activation energy was determined as 82.3 kJ/mol, which is higher than that for homogeneous catalyzed system (for both acidic and basic catalyst). The experimental results have been analyzed vis-à-vis simulations of cavitation bubble dynamics. Due to 3-phase heterogeneity of the system, the yield was dominated by intrinsic kinetics, and the optimum temperature for the highest yield was close to boiling point of methanol. At this temperature, the influence of cavitation bubbles (in terms of both sonochemical and sonophysical effect) is negligible, and ultrasonic micro-streaming provided necessary convection in the system. The influence of all parameters on the reaction system was found to be strongly inter-dependent.