کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
10622786 989312 2005 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Calculating liquid transport into high-performance concrete during wet freeze/thaw
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
Calculating liquid transport into high-performance concrete during wet freeze/thaw
چکیده انگلیسی
A method for calculation of the liquid transport into high-performance concrete (HPC) during wet freeze/thaw exposure is proposed. This transport, or pumping effect, which is larger than absorption above 0 °C, is in the present calculation assumed to be caused by diffusion of water from the wet surface, through hardened cement paste (HCP) where water in nonfreezable, to large voids with very low vapour content. Saturated flow is assumed between the wet concrete surface and the active voids. Cranks solution for stationary transport into a hollow sphere of mean radius r̄ is combined with Powers spacing factor. The shell thickness is the mean void spacing factor (L̄). The flow into voids was calculated (“good” vs. “bad” void system) for various maximum possible moisture potentials between wet surface, saturated HCP and active void (at 263 K and 1 atm; Δp=saturation pressure=260 Pa or Δv=moisture content=0.00215 kg/m3 in void, etc.). Realistic voids and diffusivity were used. The calculation fits with liquid uptake measured in wet freeze/thaw of HPC with exposed surface equal to the surface of the active voids. The lower the void content, the lower is the pumping effect. Nonstationary transport, further experiments and simulations are discussed briefly.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Cement and Concrete Research - Volume 35, Issue 2, February 2005, Pages 213-219
نویسندگان
,