کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10624421 | 989589 | 2016 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
One-step Sinter-HIP method for preparation of functionally graded cemented carbide with ultrafine grains
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Ultrafine crystalline functionally graded cemented carbides (FGCCs) with a surface zone enriched in binder phase were prepared by a one-step Sinter-HIP method. The influence of sintering pressure and cubic carbide composition on the formation of gradient layer was examined. The results show that the ultrafine FGCC with surface zone enriched in binder phase can be formed by the one-step Sinter-HIP method. The process of the gradient layer formation is accelerated under higher sintering pressure; the gradient layer thickness increases with the sintering pressure increasing. The gradient layer thickness is controlled by diffusion distance of cubic carbide formers, such as Ti, Ta and Nb. The addition of (Ta,Nb)C leads to decrease the thickness of gradient layer.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 42, Issue 4, March 2016, Pages 5362-5367
Journal: Ceramics International - Volume 42, Issue 4, March 2016, Pages 5362-5367
نویسندگان
Xiangkui Zhou, Zhifeng Xu, Kai Wang, Guojian Li, Tie Liu, Qiang Wang, Jicheng He,