کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10625080 | 989613 | 2014 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Polymer-derived SiC ceramics from polycarbosilane/boron mixtures densified by SPS
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Spark plasma sintering (SPS) is considered as an efficient method for the densification of advanced ceramics. Since commercially available prepyrolized polycarbosilane could not be densified by SPS even at 2050 °C, the addition of amorphous boron was investigated. Aiming to control dispersion of boron in the powder mixture, the preceramic polymer was mixed either before or after pyrolysis. Boron worked as a sintering additive resulting in dense monoliths, with a good combination of Vickers hardness and indentation fracture toughness. Toughening mechanisms were mainly attributed to crack deflection of finely distributed boron carbide phase. The boron mixing before pyrolysis resulted in optimum dispersion of B-rich secondary phase which resulted in Vickers hardness as high as 25.8 GPa and fracture toughness of 4.7 MPa m0.5
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 40, Issue 9, Part A, November 2014, Pages 14493-14500
Journal: Ceramics International - Volume 40, Issue 9, Part A, November 2014, Pages 14493-14500
نویسندگان
E. Bernardo, I. Ponsot, P. Colombo, S. Grasso, H. Porwal, M.J. Reece,