کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10625283 | 989622 | 2014 | 34 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of friction stir processing on the microstructure and mechanical properties of Cu-TiC composite
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this research, a Copper-based composite was fabricated by TiC reinforcement via friction stir processing. Holes with the diameter and depth of 2Â mm were made on the surface of a pure copper specimen and filled by TiC powders. Friction srir processing was carried out with transverse and rotational speeds of 50Â mm/min and 1000Â rpm, respectively. Optical and scanning electron microscope observations revealed that FSP produced a fine grain microstructure with a homogeneous distribution of particles on the surface. Reinforcing particles showed a good bonding with the base metal. Mechanical test results also proved that FSP increased the microhardness and the wear resistance of specimen as a result of grain refinement and the existence of TiC particles in the FSP zone. Maximum hardness in the stir zone was 117 Vickers, while the hardness of pure copper was 65 Vickers. X-Ray analysis proved no intermetallic compounds in the stir zone.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Ceramics International - Volume 40, Issue 8, Part B, September 2014, Pages 12969-12976
Journal: Ceramics International - Volume 40, Issue 8, Part B, September 2014, Pages 12969-12976
نویسندگان
M. Sabbaghian, M. Shamanian, H.R. Akramifard, M. Esmailzadeh,