کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10629368 | 991062 | 2015 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Preparation and influence of highly concentrated screen-printing inks on the development and characteristics of thick-film varistors
ترجمه فارسی عنوان
تهیه و تأثیر گرافیت های بسیار رنگی روی صفحه نمایش بر روی توسعه و ویژگی های وریستور ضخیم فیلم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
The preparation of screen-printing inks with a high solids load was studied for the development of thick-film varistors. A high solids load can ensure a higher green density of the films for enhanced densification and microstructure development in order, to obtain good current-voltage (I-U) characteristics for the thick-film varistor, even after short firing times at temperatures below 1000 °C. The inks with a solids load of 50, 60 and 70 wt.% enabled the preparation of thick-film varistors on an alumina substrate with a homogenous microstructure, a uniformly distributed Bi2O3-rich phase and a good varistor film-electrode contact after firing at 900 °C for 15 min. However, the porosity of the films gradually decreased with the increasing solids load and a varistor film prepared from the ink with the highest solids load of 70 wt.% had minimal porosity and improved I-U characteristics in comparison with the other samples.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 35, Issue 11, October 2015, Pages 3013-3023
Journal: Journal of the European Ceramic Society - Volume 35, Issue 11, October 2015, Pages 3013-3023
نویسندگان
R. Rudež, J. PavliÄ, S. Bernik,