Toughening effect of multi-walled boron nitride nanotubes and their influence on the sintering behaviour of 3Y-TZP zirconia ceramics

Different amounts (0.5, 1, 2.5 and 5 wt%) of hollow “cylindrical” and “bamboo-like” boron nitride nanotubes (BNNTs) have been used to reinforce 3Y-TZP zirconia ceramics via spark plasma sintering. No significant influence of different morphologies of BNNTs on the mechanical properties at the macro-scale (elastic modulus, hardness, and fracture toughness) has been observed. The fracture toughness increased continuously with the increasing amount of the BN nanotubes up to 2.5%, resulted in the improvement of ∼100% compared to the reference ZrO2. A direct influence of BNNTs on the toughening of ZrO2 has been recognized. The BNNTs strengthen the zirconia grain boundaries resulting in the alteration in fracture mode from inter- to trans-granular. The BNNTs also promoted the transformation toughening of zirconia. Their influence on the bridging and pull out has been confirmed by the investigation of the composites with the amorphous borosilicate matrix.