کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10629868 | 991194 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tensile strength and fiber/matrix interfacial properties of 2D- and 3D-carbon/carbon composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Tensile strength and fiber/matrix interfacial properties of 2D- and 3D-carbon/carbon composites Tensile strength and fiber/matrix interfacial properties of 2D- and 3D-carbon/carbon composites](/preview/png/10629868.png)
چکیده انگلیسی
The tensile and fiber/matrix interfacial properties of 2D and 3D carbon/carbon composites (C/C) were compared. To elucidate the effect of three-dimensional reinforcement, both C/Cs were composed of the same constituents and prepared via. the same process route. The tensile fracture strain of both C/Cs degraded with increasing bulk density, and the fracture strain of the 3D-C/Cs were larger than that of the 2D-C/Cs at the same bulk density. The interfacial bonding strength of the 3D-C/Cs were found to be much lower than that of the 2D-C/Cs. From the comparison of the interfacial and tensile fracture behavior, high tensile fracture strains of 3D-C/Cs were concluded to be attributed to the weak interfacial bonding. This low interfacial strength of the 3D-C/Cs was suggested to be caused by the residual stresses induced during processing in the 3D-C/Cs due to three-dimensional restriction of the fibers.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 25, Issue 4, April 2005, Pages 535-542
Journal: Journal of the European Ceramic Society - Volume 25, Issue 4, April 2005, Pages 535-542
نویسندگان
Hiroshi Hatta, Ken Goto, Shinya Ikegaki, Itaru Kawahara, Mohamed S. Aly-Hassan, Hiroyuki Hamada,