کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10630175 | 991243 | 2005 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hydrothermal corrosion of zirconia-toughened alumina (ZTA) at 200 °C
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
To investigate the corrosion behaviour of zirconia-toughened alumina (ZTA) under hydrothermal corrosion, a commercial material was compared with materials of similar composition, but fabricated using different processing methods and pure alumina. The specimens were corroded at a temperature of 200 °C in deionised water. Generally, linear corrosion kinetics were found. Pure alumina shows the lowest mass loss and the smallest rate constants. The reduction of the four-point bending strength does not correlate with the mass loss. The main parameter for the degradation is the cubic/tetragonal to monoclinic transformation of zirconia. Investigation of the corrosion of polished surfaces reveals spallation of Al2O3 grains or groups of grains surrounded by zirconia as the main mechanism. A decrease in the size of zirconia grains helps to reduce the strength degradation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 25, Issue 10, 2005, Pages 1805-1812
Journal: Journal of the European Ceramic Society - Volume 25, Issue 10, 2005, Pages 1805-1812
نویسندگان
Mathias Herrmann, Björn Seipel, Jochen Schilm, Klaus G. Nickel, Grit Michael, Andreas Krell,