کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673170 | 1010222 | 2012 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites](/preview/png/10673170.png)
چکیده انگلیسی
Data is presented for wheel wear, cutting forces and workpiece integrity when high speed routing 10 mm thick CFRP laminates using single layer electroplated diamond and CBN grinding points as opposed to standard end milling tools. A 60,000 rpm retrofit spindle was utilised to accommodate the 10 mm diameter wheels having grit sizes of 76, 151 and 252 μm employed under either roughing or finishing parameters. Wear of CBN points exhibited a near two-fold increase over diamond with a similar ratio for cutting forces. Despite use of flood cooling, point geometry when roughing compromised life and integrity due to excessive clogging.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 295-298
Journal: CIRP Annals - Volume 61, Issue 1, 2012, Pages 295-298
نویسندگان
Sein Leung Soo, Islam S. Shyha, Tom Barnett, David K. Aspinwall, Wei-Ming Sim,