کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673584 | 1010258 | 2008 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Metal filled resin for stereolithography metal part
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A new route to produce metallic parts through stereolithography is explored in this work. Stereolithography of metallic materials consists of a UV curable metallic suspension prepared with a pre-polymer acting as the binder material, a photo-initiator, metallic powder and additives. The critical material and process parameters are investigated in order to identify appropriate photosensitive metallic suspensions for stereolithography, based on their rheological and photochemical properties. Two different types of resins, unsaturated polyester and epoxy resin were considered in this study, to get a better understanding of free radical, cationic and hybrid polymerisation mechanisms, being the photo-curing reactions carried out at different light intensities. The powder used was either tungsten carbide (WC) or cobalt (Co) with different powder sizes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 235-238
Journal: CIRP Annals - Volume 57, Issue 1, 2008, Pages 235-238
نویسندگان
P.J. Bartolo, J. Gaspar,