کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10673937 | 1010266 | 2011 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Acoustic emission based tool contact detection for ultra-precision machining
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Acoustic emission based tool contact detection for ultra-precision machining Acoustic emission based tool contact detection for ultra-precision machining](/preview/png/10673937.png)
چکیده انگلیسی
Precise tool length measurement and work coordinate setup have been challenging tasks in ultra-precision machining. An acoustic emission (AE) sensor can be used to do both tasks at the same time based on AE generated on contact. First, a parametric study was conducted to identify the relationship between damage on the workpiece and key parameters. Second, two approaches, continuous and incremental, were proposed to minimize the potential damage to the workpiece surface. The incremental method produced much smaller damage while the continuous method minimized the setup time. Proper selection of either method depending on the application would improve the precision of tool length and work coordinate setup.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 141-144
Journal: CIRP Annals - Volume 60, Issue 1, 2011, Pages 141-144
نویسندگان
S. Min, J. Lidde, N. Raue, D. Dornfeld,