کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
10674411 | 1010317 | 2013 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Lubrication using porous surface layer for cold drawing of steel wire
ترجمه فارسی عنوان
روانکاری با استفاده از لایه سطح متخلخل برای کشیدن سر سیمهای فولادی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
روانکاری اصلاح سطح، فولاد،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
As a lubricant for steel cold working, metal soap on zinc phosphate coating is widely used. However the lubrication causes hazardous wastes, and hence an alternative system is demanded. The authors proposed to utilize porous layer on workpiece surface as a reservoir of liquid lubricant. In this study, 0.64%C steel wires were oxidized at 923 K under air and chemically reduced by pure hydrogen to form porous surface layer with pores 1-2 μm in diameter. In cold drawing with machine oil, the friction coefficient on the porous surface was 0.06, while that on normal surface was 0.11. The lubrication mechanism with porous surface is discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: CIRP Annals - Volume 62, Issue 1, 2013, Pages 235-238
Journal: CIRP Annals - Volume 62, Issue 1, 2013, Pages 235-238
نویسندگان
Hiroshi Utsunomiya, Shota Takagishi, Akira Ito, Ryo Matsumoto,