Effect of the carriers on the microstructure of mango powder obtained by spray drying and its functional characterization

This work aimed the induction of crystallization on powder mango juice during the process of spray drying and the correlation of the microstructure of the powder obtained with the functional properties of stickiness and solubility. To perform this work, we used mango juice with 12 °Brix. Before being dehydrated, the juice undertook addition from the following carriers: maltodextrin, gum arabic and starch waxy in the concentration of 12%. The solution also received addition of crystalline cellulose in the concentrations of 0, 3, 6 and 9%. The powder was obtained through the use of a mini-spray dryer of laboratorial scale. Analyses of microstructure, stickiness, hygroscopicity and solubility were performed on the obtained powder. The microstructure analyses showed that the powders of the mango juices obtained through spray drying using the carriers maltodextrin, gum arabic, starch waxy without the addition of cellulose presented surfaces of amorphous particles. The analysis XRD showed that when 3, 6 and 9% of cellulose were added, the particles showed half-crystalline surfaces. The value of stickiness decreased in terms of the concentration of cellulose reaching values of 0.15, 0.22 and 0.11 Kg-f for maltodextrin, gum arabic and starch waxy, respectively. The functional property of solubility is affected when 9% of cellulose is added reaching the values of 72, 71 and 31% for the carriers maltodextrin, gum arabic and starch wax, respectively.