Potentiometric determination of antihistaminic diphenhydramine hydrochloride in pharmaceutical preparations and biological fluids using screen-printed electrode

The performance characteristic of sensitive screen-printed (SPE) and carbon paste (CPE) electrodes was investigated for the determination of diphenhydramine hydrochloride (DPH) drug in pure, pharmaceutical preparations and biological fluids. Different experimental conditions namely types of materials used to prepare the working electrode (plasticizer), titrant, pH, temperature and life time were studied. Under these conditions, the SPE shows the best performance than CPE with respect to total potential change and potential break at the end point. The SPE and CPE exhibit suitable response to DPH in a concentration range of 1.0.10− 2 to 1.0.10− 6 mol/L with a limit of detection 9.70.10− 7 and 9.80.10− 7 mol/L, respectively. The slope of the system was 55.2 ± 1.0 and 54.7 ± 1.0 mV/decade over pH range 3.0–8.0 and 3–7 for SPE and CPE, respectively. Selectivity coefficients for DPH relative to a numbers of potential interfering substances were investigated. The SPE and CPE show a fast response time of 10 and 16 s and were used over a period of 2 months with a good reproducibility. The sensors were applied successfully to determine DPH in pharmaceutical preparations and biological fluids. The results are compared with the official method.

► The performance characteristic of screen-printed (SPE) and carbon paste (CPE) electrodes was investigated for the determination of diphenhydramine hydrochloride (DPH) drug.
► Different experimental conditions were studied.
► Under these conditions, the SPE shows the best performance and lower response time than CPE.
► Selectivity coefficients for DPH relative to a numbers of potential interfering substances were investigated.
► The sensors were applied successfully to determine DPH in pharmaceutical preparations and biological fluids.