کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1284001 | 1497960 | 2014 | 9 صفحه PDF | دانلود رایگان |
• Carbon nanofiber (CNF)/cobalt oxide nanopyramid core–shell nanowires (NWs).
• Introduction of CoO seed-loaded CNFs for uniform and dense Co3O4 nanopyramids.
• Synergistic effect of 1-D CNFs, Co3O4 nanopyramids, and the geometric networks.
Carbon nanofiber (CNF)/Co3O4 nanopyramid core–shell nanowires (NWs) are synthesized using an electrospinning method followed by reduction and hydrothermal treatment in order to improve the capacity, cycle stability, and high-rate capability of the electrodes in Li ion batteries (LIBs). The morphology, crystal structure, and chemical states of all samples are investigated by means of field emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. For comparison, conventional CNFs, octahedral Co3O4, and Co3O4/CNF composite electrodes are prepared. LIB cells fabricate with the CNF/Co3O4 nanopyramid core–shell NWs exhibit superb discharge capacity (1173 mAh g−1 at the 1st cycle), cycle stability (795 mAh g−1 at 50 cycles), high initial Coulombic efficiency (84.8%), and high-rate capability (570 mAh g−1 at a current density of 700 mA g−1) as compared to the conventional CNF, octahedral Co3O4, and Co3O4/CNF composite electrodes. The performance improvement is owing to the introduction of one-dimensional CNFs relative to efficient electron transport in the core region, extensive utilization of Co3O4 nanopyramids with high capacity grown closely on the CNFs in the shell region, and the network structures of the electrode relative to the improvement of Li ion diffusion.
Journal: Journal of Power Sources - Volume 272, 25 December 2014, Pages 828–836