کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1284288 | 1497986 | 2014 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Study of reactions of activated Mg-based powders in heated steam
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
شیمی
الکتروشیمی
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Study of reactions of activated Mg-based powders in heated steam Study of reactions of activated Mg-based powders in heated steam](/preview/png/1284288.png)
چکیده انگلیسی
Activated Mg-based powders are prepared by high-energy milling and characterised with XRD, SEM, TG and BET techniques. This study focus on reactions of Mg-based powders with flowing steam that is heated at 500, 600, and 700 °C in a transparent pipe furnace. Morphologies and phases of solid reaction products are analysed by SEM, XRD, and residual metal content, and ignition delay times are measured. Experimental results show that all Mg-based powders oxidise at 500 °C and ignite at 600 °C. At 700 °C, all samples burn completely to form magnesium oxide (MgO) within 5 min. Residual metal contents and ignition delay times of all samples decrease with increasing temperature, and ignition delay times of activated Mg-based materials containing cobalto-cobaltic oxide (Co3O4) are only 22 s at 700 °C. Milled Mg powders are more reactive in heated steam than unmilled Mg powders, and the addition of Co3O4 further increases magnesium reactivity in heated steam.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Power Sources - Volume 246, 15 January 2014, Pages 960-964
Journal: Journal of Power Sources - Volume 246, 15 January 2014, Pages 960-964
نویسندگان
Hai-tao Huang, Mei-shuai Zou, Xiao-yan Guo, Rong-jie Yang, Yun-kai Li,