Hydrogen purification for fuel cell using CuO/CeO2–Al2O3 catalyst

CuO/CeO2, CuO/Al2O3 and CuO/CeO2–Al2O3 catalysts, with CuO loading varying from 1 to 5 wt.%, were prepared by the citrate method and applied to the preferential oxidation of carbon monoxide in a reaction medium containing large amounts of hydrogen (PROX-CO). The compounds were characterized ex situ by X-ray diffraction, specific surface area measurements, temperature-programmed reduction and temperature-programmed reduction of oxidized surfaces; XANES-PROX in situ experiments were also carried out to study the copper oxidation state under PROX-CO conditions. These analyses showed that in the reaction medium the Cu0 is present as dispersed particles. On the ceria, these metallic particles are smaller and more finely dispersed, resulting in a stronger metal–support interaction than in CuO/Al2O3 or CuO/CeO2–Al2O3 catalysts, providing higher PROX-CO activity and better selectivity in the conversion of CO to CO2 despite the greater BET area presented by samples supported on alumina. It is also shown that the lower CuO content, the higher metal dispersion and consequently the catalytic activity. The redox properties of the ceria support also contributed to catalytic performance.