Analysis of heat and mass transport in a miniature passive and semi passive liquid-feed direct methanol fuel cell

A two-dimensional, transient, multi-phase, multi-component, and non-isothermal model has been developed to solve the heat and mass transport in a passive and semi passive liquid-feed direct methanol fuel cell (DMFC). A semi passive DMFC uses channel at the cathode side to facilitate the oxidant transport. The transient characteristics of the temperature, methanol concentration, methanol crossover, useful current density and methanol evaporation are investigated. The results indicate that the temperature in the fuel cell increases during operation as much as 10 °C, due to the heat generation by internal phase change and the electrochemical reactions. However, it is revealed that the temperature distribution is nearly uniform at any time through all porous layers including the fuel cell and fuel delivery system. The effect of using an active feeding system in the cathode and passive methanol feeding in the anode (semi passive system) on the performance of a fuel cell is also studied. The active oxidant feeding to the cathode catalyst layer in the semi passive cell improved the fuel cell performance compared to that in a passive one. However, in general, the performance of passive cell is better than that in a semi passive one because of more temperature increase in the passive system.