Carbon-coated graphite for anode of lithium ion rechargeable batteries: Carbon coating conditions and precursors

Carbon coating of natural graphite particles was performed by mechanical mixing of natural graphite with different carbon precursors in a scale of about 100 g. Anode performance in lithium ion rechargeable batteries was studied on the resultant carbon-coated graphite. Carbon formed on graphite particles had amorphous structure and low density. By carbon coating, a decrease in irreversible capacity of the first charge/discharge cycle in an electrolyte solution of EC/PC = 3/1 was observed, without noticeable change in discharge capacity. Carbon derived from different precursors did not give any marked difference in anode performance of carbon-coated graphite. Optimum conditions for carbon coating were determined as the coating of 4–13 mass% at 700–1000 °C. The present mechanical mixing of natural graphite and carbon precursor in powder is concluded to be a simple but sufficient process to produce carbon-coated graphite for anode material in lithium ion rechargeable batteries. As carbon precursor, PVA was shown to be one of the appreciable carbon precursors.