کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1290586 | 973330 | 2008 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Stress and plastic deformation of MEA in fuel cells: Stresses generated during cell assembly Stress and plastic deformation of MEA in fuel cells: Stresses generated during cell assembly](/preview/png/1290586.png)
A linear elastic–plastic 2D model of fuel cell with hardening is developed for analysis of mechanical stresses in MEA arising in cell assembly procedure. The model includes the main components of real fuel cell (membrane, gas diffusion layers, graphite plates, and seal joints) and clamping elements (steel plates, bolts, nuts). The stress and plastic deformation in MEA are simulated with ABAQUS code taking into account the realistic clamping conditions. The stress distributions are obtained on the local and the global scales. The first one corresponds to the single tooth/channel structure. The global scale deals with features of the entire cell (the seal joint and the bolts). Experimental measurements of the residual membrane deformations have been provided at different bolts torques. The experimental data are in a good agreement with numerical predictions concerning the beginning of the plastic deformation.
Journal: Journal of Power Sources - Volume 180, Issue 1, 15 May 2008, Pages 393–401