A semi-empirical method for electrically modeling of fuel cell: Executed on a direct methanol fuel cell

In this paper, a novel semi-empirical modeling method to mathematically derive a nonlinear equivalent circuit from a special group of impedance fuel cell models is proposed. As an example, a 5-cm2 direct methanol fuel cell (DMFC) was modeled by this method. The derived equivalent circuit is composed of lumped nonlinear resistors, capacitors and an inductor. The nonlinear circuit has an impedance equivalent to the target fuel cell in various operating conditions and provides a good approximation of the static and transient behaviors of the fuel cell. The equivalent circuit fuel cell model was validated by comparing its numerical simulation results with its polarization curve and the dynamic behavior of the target DMFC. These comparisons were performed while the DMFC was operating under square current pulses with different upper and low current levels.